Home of Construction Machinery

ABG7820 Integral Track Shoe 14280234

The track shoes of the paver are severely worn, and frequent replacement is a very annoying thing. I think every paver enthusiast hopes that our paver track shoes can be kept as they are, although it is impossible to keep them as they were first seen.

At present, our paver track shoes are divided into separate track shoes and integral track shoes. The integrated paver track plate adopts an integrated design, which makes disassembly very inconvenient. However, the rubber block of the separated paver track plate can be separated from the iron plate. After the rubber block wears out and fails, the bolt can be loosened to replace it with a new rubber block, saving time and effort.

But no matter what type of paver track shoe you choose, good materials are essential.

When the paver works, it needs to generate adhesion through the friction between the rubber on the paver's track shoes and the ground, and it also needs to rely on the difference in walking speed between the tracks on both sides to achieve steering. During these processes, the paver track shoes will generate significant friction with the ground. If inferior paver track shoes are used, such as rubber with poor strength or deformation ability, your paver track shoes will only experience more severe wear and damage, and the cost of replacing the paver track shoes will significantly increase.

Email: S15852150447@163.com WeChat: 15852150447

(Disclaimer | Part of the content comes from the internet! This article is for communication and learning only, and the copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source labeling is incorrect or infringes on your rights, please let us know and we will immediately delete it.)“