Home of Construction Machinery

Planer is a heavyweight construction machinery equipment, therefore the quality requirements for tires are also very strict. The Airless tire of the milling machine is made of Malaysian rubber. The solid wheel is mainly used on the wheel milling machine and paver. It is made of tread rubber and base steel ring through molding vulcanization. It has the characteristics of heat resistance, wear resistance, tensile strength, etc., and its service life is 2-3 times longer than some domestic Airless tire.

Regarding the maintenance of rubber tires:

Rubber with elasticity is most afraid of deterioration caused by the deterioration of the external environment. The most common situation is when the rubber becomes hard, loses elasticity, and eventually causes cracking. In severe cases, there may even be tire blocks peeling off the tread.

So, within the possible range, doing some simple maintenance is definitely beneficial. The reason why tires can absorb vibrations from the ground when the vehicle is driving is not only due to the air cushion inside, but also due to the twisting of the tire edges. Therefore, after washing the car every time, it is advisable to use tire wax that can maintain rubber elasticity and apply the entire tire edge once to moisturize the rubber. Not only does it look black, shiny, and beautiful, but it also has practical maintenance effects.

In addition, if the vehicle is not used for a long period of time, it is best to find a way to raise the vehicle and let the tires off the ground, because if the weight of the vehicle is pressed in a fixed position for a long time, it will cause the steel wire layer and curtain layer in this area to deform due to long-term pressure, directly affecting the true roundness of the tires, which will have an impact on driving safety and comfort.

Email: S15852150447@163.com WeChat: 15852150447

(Disclaimer | Part of the content comes from the internet! This article is for communication and learning only, and the copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source labeling is incorrect or infringes on your rights, please let us know and we will immediately delete it.)“