Home of Construction Machinery

Wittgen 24V DC Yellow Rotating Warning Light 68407

Wiring steps for alarm lights:

Next, we will introduce step by step how to correctly wire the 24V alarm light.

Step 1: Safety measures

Before starting wiring, make sure to disconnect the power supply and take necessary safety measures, such as wearing insulated gloves and goggles.

Step 2: Determine the polarity of the power supply

Check the polarity markings of the 24V power supply. Usually, the positive pole is represented by "+" and the negative pole is represented by "-". Ensure correct connection of positive and negative poles.

Step 3: Connect the power supply

Connect the positive pole of the 24V power supply to the positive pole on the terminal block or terminal strip, and the negative pole to the negative pole on the terminal block or terminal strip. Use a flat headed screwdriver to tighten the screws to ensure a secure connection.

Step 4: Connect the alarm light

Connect the positive wire of the alarm light to the positive wire on the terminal block or terminal strip, and the negative wire to the negative wire on the terminal block or terminal strip. Ensure that the connection is secure.

Step 5: Test the lighting

Reconnect the power supply and test whether the alarm light is working properly. If everything is normal, the alarm light will light up.

Email: S15852150447@163.com WeChat: 15852150447

(Disclaimer | Part of the content comes from the internet! This article is for communication and learning only, and the copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source labeling is incorrect or infringes on your rights, please let us know and we will immediately delete it.)“