Home of Construction Machinery

What are the walking modes of milling machines

1、 Static walking mode

The static walking mode refers to the milling machine not walking during operation, but rotating the main shaft of the milling machine through the engine, thereby achieving the functions of crushing, milling, and cleaning the road surface. In static walking mode, the milling machine mainly relies on the front wheels for self balance, and the rear wheels are mainly used as support. Compared to the other two walking modes, static walking mode has a lower cost, but its applicability is relatively limited and is only suitable for use in flat road construction and maintenance.

2、 Semi dynamic walking mode

The semi dynamic walking mode refers to the milling machine driving the spindle of the milling machine to rotate through the engine during operation, while assisting the motor to move the machine body, giving the entire milling machine a certain walking ability. In the semi dynamic walking mode, the milling machine can not only perform the functions of crushing, milling, and cleaning the road surface, but also achieve strong walking ability, and ensure construction quality and efficiency while constructing and maintaining the road. Compared to the static walking method, the semi dynamic walking method has a higher cost, but it has a wider range of construction applications and is commonly used in the construction and maintenance of small and medium-sized roads.

3、 Full dynamic walking mode

The full dynamic walking mode refers to the milling machine driving the main shaft of the milling machine through the engine and controlling the front and rear walking through the hydraulic system during operation, thereby achieving the functions of crushing, milling, and cleaning the road surface, and having strong walking ability and mobility. Under full dynamic walking mode, the milling machine can quickly and efficiently complete road construction and maintenance tasks, while ensuring engineering quality. Compared to static and semi dynamic walking modes, fully dynamic walking mode is the most cost-effective and commonly used for large-scale road construction and maintenance.

Email: S15852150447@163.com WeChat: 15852150447

(Disclaimer | Part of the content comes from the internet! This article is for communication and learning only, and the copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source labeling is incorrect or infringes on your rights, please let us know and we will immediately delete it.)“