15852150447
S15852150447@163.com
audelo@163.com
audelo@163.com
Our company operates mechanical parts and maintenance services such as pavers, rollers, milling machines, etc!
Provide accessory models: S2100-2, S1800-2, S1300-3, S2500, S1700, S2000-2, S1600-2, S3000-2, s1900-3L, S1800, S2100, S2100-3, S800, S1300-2, S1100-2, S18801880-3L, S1880L, S1100-3, S1103-3, S1103, S1600, S1900
Paver accessories: track plate, blades, bottom plate, protection, ironing plate, ironing plate assembly, heating bar, rammer, wear-resistant bar, large chain, agitator shaft, drive shaft, supporting wheel, chain rail, guide wheel, drive gear, hydraulic cylinder, leveling instrument, level gauge, balance beam, solenoid valve, radiator, filter element, engine ma阿intenance parts.
Roller accessories: water pump, spray nozzle, tire, steel wheel, hydraulic cylinder, seat, water tank cover, water tank, radiator, filter element, engine maintenance parts.
Milling machine accessories: cutter head, cutter seat, conveyor belt, roller, sensor, walking four-wheel belt
Wear resistant accessories: paver feeding bottom plate, ironing plate bottom plate, wear resistant strip, hammer, heating strip, heating rod, ironing plate heating strip, hammer heating strip, hammer frame, knife plate
Contact information:
WhatsApp：+8615852150447
WeChat: xz15852150447
Email: S15852150447@163.com
| Model AUW55HRi | Model: W 55 HRi Cold Milling Machine |
| Engine brand/power/maximum speed VOLVO 565 kW @ 2000 rpm | Engine Foton Cummins F4.5-CS4-119 |
| Milling rotor milling width, mm 2000/2200 | Rated power, at 2200 revolutions per minute: 89 kW/119 hp/121 PS |
| Milling depth * ¹, cm 0~33 | Milling width 500 mm |
| Edge milling depth * ¹, cm 0~45 | Milling depth 0-180 mm |
| Maximum driving performance and milling speed, m/min 0~85 | Fuel tank 160 l |
| Minimum milling turning radius, m ² | Water tank 320 l |
| Track assembly track (length x width x height), mm 1705×300×600 | Milling speed 0-30.5 m/min |
| The width of the material conveying system's receiving belt, mm 850 | Driving speed 0-8 km/h |
| Theoretical material transport capacity, m³/h 420 | National Emission Standard IV |
| Swing angle of feeding conveyor, ° 120 | Unloading belt width 400 mm |
| Material conveying height, mm 4970 | |
| Weight of transportation, t 28.8 | |
| Working weight, t 30.9 | |
| Maximum mass, t 32.9 |
