Home of Construction Machinery

ABG325 leveling oil cylinder

one

Cleaning the oil cylinder: If there are impurities or dirt inside the oil cylinder, it may cause the oil cylinder to stick or leak. At this point, it is necessary to disassemble the oil cylinder and clean the internal impurities or dirt.

two

Replace the seal: If the oil cylinder leaks, it may be caused by damage to the seal. At this point, it is necessary to remove the oil cylinder and replace the damaged seal.

three

Grinding or replacing the piston rod: If there are scratches or wear on the surface of the piston rod, it may cause cylinder leakage or sticking. At this point, it is necessary to grind or replace the piston rod.

Email: S15852150447@163.com WeChat: 15852150447

(Disclaimer | Part of the content comes from the internet! This article is for communication and learning only, and the copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source labeling is incorrect or infringes on your rights, please let us know and we will immediately delete it.)“